I-view Digi-4800XP 16 channels Hybrid Embedded DVR Manuel d'utilisateur

1

10 Middle Section of the DVR Front Panel (Fig 1-3-1.1 & Fig 1-3-1.2) DVR NO.: Display for the ID address of DVR. The detail setting please ref

11Right Section of the DVR Front Panel (Fig 1-3-1.3) Press key to search for videos in database. Press “ 0 “ + “ “ to close the playback function.

12 1-2-2. Back Panel of DVR System According to the different model of the DigiCap DVR, their back panel configuration may be different, please read

13 14. Video loop output: The optional 16 (1-16) cameras video loop output. 15. Video loop output: The optional 16 (17-32) cameras video loop outpu

14 7. USB port: Connect to USB device, such as USB external storage device. 8. LAN port: For TCP/IP connection. 9. Audio plug: Including Microphon

15 4. Series port: Connect to RS-232 device such as Modem. 5. Printer port: Connect to the printer. 6. Panic button port: Connect to push

16  Digi-3248Pro/3248Pro-A Back Panel Description: 1. Power plug: Plug power cable. 2. Power switch: Turn on/off power supply. 3. RS-485

17 19. Main Monitor 1 output: Display 17-32 spilt video on TV. 20.. Relay output: 3 relay output. 21. Audio input: 1-16 audio input. (For Digi-3248

18 12. Video loop output: The optional 16 (1-16) cameras video loop 13. Video in: 1-16 cameras video input. 14. Sensor input: 16 sensors inpu

19 1-2-3. DVR Remote Controller Functions 48 keys Remote controller The buttons functions of the remote controller are for user to opera

2Table of Contents About This Guide ------------------------------------------------------------------------------------------------- 4 FCC Complianc

20 27 keys Remote controller (Optional) This remote controller special design for the spot monitor application. On your remote controller, there s

21  Press F3 button to control the main monitor 1 and spot Monitor 1 display.  Press F4 button to control the Single TV Out (17-32) 2. When

22 5. The system allows to extent sensor cable for control the TV out from far away site via Remote Controller. Please follow the process as belo

23 number LED of front panel will be flashed. You can start to use the Remote controller when the LED is flashing. 4. Press “ Return “ key to st

24Chapter 2. Hardware Installation After user finish the CPU, RAM and HDD installation, please remember to go to the system Control Panel to configur

252-2. Hardware Requirement  CPU & RAM request, please refer to the table 2-2.1.  7200RMP hard drive speed or better recommended.  Rec

26 2-3. Central Process Unit (CPU) Installation 2-3-1. CPU Installations: Power Management Setup The DVR’s board comes with a surface mount Socke

27 6.) Close the load plate (A), then push the load lever (B) until it snaps into the retention tab. (Fig. 2-3.6) The CPU fits in only correct orie

28 2-4. Memory Module Installation The Platform comes with Double Data Rate II (DDR II ) socket. These sockets support up to 4 GB system memory.

29 2-5. HDD Installation The Platform of Digi-1648Pro/3248Pro/3296Pro comes with 1 IDE sockets (1st and 2nd IDE) and 7 (5+2; 2 HDDs for backup) pcs

34-8. Application logs ------------------------------------------------------------------------------ 116 4-9. Peripherals setup --------------------

30 Step 4. Mount the connected hard drives into the DigiCap II inner chassis 1 and chassis 2 as showing in Fig 2-6.3 (Allows to install 6 HDD up to

31 2-6. PTZ Camera Installation  Speed dome camera Installation:  P/T Motor Installation: The last NC-180AZ PTZ Receiver must be termi

32  Speed dome controlling port description:  Pin assignment: RS-485 & Relay out R1: Relay #1 out R2: Relay #2 out R3: Relay #3 ou

33 1. The “Sensor In” port for Dry contact input only, otherwise it will cause the device damage. 2. The “Relay Out” port for NO (Normal Open) ty

34 Chapter 3. DVR Operating System  DVR System Main Screen Take note of the following precaution before you start to configure the DVR syst

35 3-1. DVR System Control Panel Configuration Once user has finished the CPU, RAM and HDD installation, please click the Control Panel icon ( ) fr

36  Control Panel Function Description: File Explore – To select the folder or file. Device Manager – To check the device driver. Ajust Da

37 Auto Dialup- ezDialup– Allow you to auto dial up the 3G modem to connect the Internet when turn on the Witness Pro program. Set Up Passw

38 3-1-1. Adjust Date / Time. Please click icon from Control Panel to set DVR system “Date & Time”, “Time Zone” and “Internet Time”.

39 enter the “Local Area Connection Properties” display. 3. Double click the “Internet Protocol (TCP/IP) “item to enter the “Internet Protocol (TCP

4About This Guide Conventions used in this guide to make sure that you perform certain tasks properly, take note of the following symbols to use thro

40 3-1-3. Display Properties To set up the DVR VGA card display property, simply click the icon on the control panel to enter the “Display prope

41 3-1-4. Disk Management This chapter walks you through the hard drive formatting in DVR system when you install a brand new hard disk. Please follo

42 Fig. 3-1-4.3 Select “New Logical Drive” 8. Click “Next” to continue. 9. Select “Logical drive “partition type, and clicks “Next” to continue.

43 11. Select “Format this partition with the following settings “item, and click “Next” to continue. 12. Click “Finish” to complete hard disk

44 3. While the system displays a “Create A Shared Folder Wizard”, please click “Next” button to continue. 4. Please click the “Browse” button to

45 3-1-7. Adjust Volume Control Please click the icon on the system control panel screen to adjust the system volume. 3-1-7. Saving System I

46 3-2. DVR Main Program 3-2-1. System Configuration Diagram

47 3-3. Program Overview 3-3-1. The main function description:

5License Agreement Notice to end-user: please read the following legal agreement carefully. Use of the Witness or any of the software provided with

6party rights. If law does not permit such disclaimer of any implied warranty, the duration of any such implied warranties is limited to 90 day

7Should you have any questions concerning this Agreement, please contact I-View directly at one of the numbers or addresses listed at the beginning o

8Chapter 1. Product Introduction 1-1. Product Package Content Thank you for choosing the I-View Embedded DVR system. Before you start installing

91-2. Product Overview 1-2-1. Front Panel of DVR System The buttons of the front panel provides user to operate the DVR basic functions (e.g. ch