I-view FDMO-2MIP-20XIR IP SpeedDome Network Camera Manuel d'utilisateur télécharger pdf (Page 10)

The dome can store up to 220 presets.

 Auto Scan

Users can set up the left and right boundaries by control keyboard. Then speed

dome can scan between these boundaries. It supports up to 8 groups of scanning

paths.

 Cruising Track

The preset position can be programmed to be recalled in a set of sequences. This

sequence can be set to let the camera scan from one position to the next in a cycle

at a set speed. This feature is called the “auto cruise”. The cruise sequence and

dwell time of each preset can be set. It supports up to 8 cruising tracks, each

cruising track with 32 presets.

 Pattern Tour

Dome can memorize 600s running path or 500 programmable instructions. When

start pattern tour, speed dome will move automatically according recorded action

path. It supports 4 groups of pattern tours.

 Guard Location

The dome will automatically return to preset position if there is no operation in a

period of vacant time.

 Default Action

When you start up the dome camera or do not send commands over a long time,

the dome camera will return to its default functions which include the home place,

auto pan, auto cruise and pattern.

 Dome Address Setup

The dome supports up to 256 addresses and the dome will only response to the

instructions given to its own address. Please check the dip switch on the bottom of

the dome for address setup.

 Manual Object Tracking

The use can move the joystick up, down, left or right to track the appearing object

in the screen and use the joystick to zoom in and out with auto focus.

 Privacy Mask Protection

Set black mask areas to protect the privacy zones. The black privacy locations can

be set, and support up to 8 mask zones. This function allows you to block or mask

certain area of a scene, for preventing the personal privacy from recording or live

viewing. A masked area will move with pan and tilt functions and automatically

adjust in size as the lens zooms telephoto and wide.

 Timing Running Function

Users can set speed dome operation task at total 8 timing areas during 7 days.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 89 90

Pas de commentaire

I-view FDMO-2MIP-20XIR IP SpeedDome Network Camera Manuel d'utilisateur Page 10