I-view FDMO-2MIP-20XIR IP SpeedDome Network Camera Manuel d'utilisateur télécharger pdf (Page 84)

 TIMING ACTION

TIMING ACTION allows the user to set up the

actions of the dome in 7 days (each day with 8

timing segments). When fishing the setup, the

dome will do the actions according to the setup

motion during the defined time segment.

NO.: Here shows the day within a week. Move the

cursor here and press IRIS OPEN to enter. Move

joystick up or down to select the Serial No. (1-8)

and then press IRIS OPEN to confirm.

START: To set up the start time for the defined

motion within this time segment. Press IRIS

OPEN to confirm.

STOP: To set up the stop time for the defined

motion within this time segment. Press IRIS

OPEN to confirm.

MOTION: To setup the motion that will be

operated in this time segment. The motion

includes: NONE. PRESET 1-8, SCAN 1-4,

SEQUENCE 1-4 and PATTERN 1-4.

ON/OFF: Move the cursor here and press IRIS

OPEN to enter to enable or disable this function.

Press IRIS OPEN to confirm.

COPY: The user could set up each 8 segment of 7

days separately or can copy the finished setting for

one day to the current day. Move the cursor there

and press IRIS OPEN to copy the settings.

BACK: Press opeN to save and back to last menu.

It is not allowed to set up the same time

segment during one day. And the time

segment cannot exceed 00:00. During the timing

action segment, the defined action will be stopped

if the user moves the dome. If there is operation

during the defined time segment, the action will re-activated as long as it is in the

defined timing action segment.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 90

Pas de commentaire

I-view FDMO-2MIP-20XIR IP SpeedDome Network Camera Manuel d'utilisateur Page 84