I-view FDMO-2MIP-20XIR IP SpeedDome Network Camera Manuel d'utilisateur télécharger pdf (Page 33)





 Setup Tour :

1. Select Tour ID and then entry the Tour name.

2. Drop the menu from the Type section, and then select the Tour item.

3. Click Add (Delete) icon to create (delete) a Tour ID.

4. Choice the Preset number and then click ’Add’ button, repeat this

process to add more preset ID for tour scan.

5. Click “ Save” button to save the Preset position.





 Setup Scan :

1. Select Scan ID and then entry the Tour name.

2. Drop the menu from the Type section, and then select the Scan item.

3. Click Add (Delete) icon to create (delete) a Scan ID.

4. Move the IP speed dome Pan/Tilt/Zoom to the position which you want

to setup for the begin position, then click “ Begin” button.

5. Move the IP speed dome Pan/Tilt/Zoom to the position which you want

to setup for the end position, then click “ End” button





 Setup Track :

1. Select Track ID and then entry the Track name.

2. Drop the menu from the Type section, and then select the Track item.

3. Click Add (Delete) icon to create (delete) a Track ID.

4. Click “ Begin” button and then start to move the Pan/Tilt/Zoom

continually (Maximum is 500 seconds ).

5. Click “ End” button when you want to stop the track scan.

 Run the Preset, Tour, Scan and Track function:

Please follow up the process as below to run the Preset, Tour, Scan and

Track function

1. Drop the menu from the Type section, and then select the Preset or

Tour or Scan or Track item.

2. Select the Preset or Tour or Scan or Track ID which you want to run

from Name section.

3. Click Call icon to start run the Preset or Tour or Scan or Track

function.

4. Click “-” of IRIS icon to stop the Preset or Tour or Scan or Track

function.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 89 90

Pas de commentaire

I-view FDMO-2MIP-20XIR IP SpeedDome Network Camera Manuel d'utilisateur Page 33